What the Flow Stamp Hoodie Is Made Of
The MagnaFlow Flow Stamp Hoodie is a classic-fit pullover made from an 80/20 ring-spun cotton and polyester blend fleece with a 100% cotton face. The mid-weight fleece gives it a soft hand without feeling bulky, making it a comfortable layer for cool garage mornings or casual wear. The cotton face takes print and color well, while the polyester content helps the hoodie hold its shape after repeated wear.
Confirmed Materials and Construction
- MagnaFlow Flow Stamp Hoodie - Black: 80/20 ring-spun cotton/polyester blend fleece with 100% cotton face The cotton face means the outer surface behaves like a traditional cotton sweatshirt, while the polyester blend reduces shrinkage and adds durability. This combination affects both fit over time and care choices.

MagnaFlow Flow Stamp Hoodie - Black - MagnaFlow Flow Stamp Hoodie - Black: Classic fit Classic fit means the hoodie is cut with room through the chest and body, not slim or tapered. If you prefer a closer fit, you may want to size down.
- MagnaFlow Flow Stamp Hoodie - Black: Split-stitched double-needle sewing on all seams Double-needle stitching reinforces the seams, reducing the chance of splitting during active wear or washing. This is a practical detail for a hoodie that sees frequent use.
Sizing and Fit
The hoodie is available in sizes S through 2XL. The classic fit means it is not a slim or athletic cut; expect a relaxed silhouette that allows for layering a t-shirt underneath without restriction. If you are between sizes or plan to wear the hoodie over a thick shirt, choose the larger size. If you want a neater look, the smaller size will still be comfortable because the fleece has some give.
The catalog does not include a size chart or garment measurements, so your best reference is a similar classic-fit hoodie you already own. The jersey-lined hood and 1x1 ribbing at cuffs and waistband help the hoodie stay put without being tight.
Washing and Drying to Preserve the Fleece
The 80/20 cotton-polyester blend is more stable than 100% cotton fleece, but it still benefits from gentle care. Wash the hoodie inside out in cold water on a gentle cycle. This reduces friction on the cotton face and helps prevent pilling. Use a mild detergent and avoid bleach or fabric softeners, which can break down the cotton fibers over time.
Tumble dry on low heat or lay flat to dry. High heat can shrink the cotton component and damage the polyester blend. Remove the hoodie while it is still slightly damp to reduce wrinkles and maintain the shape of the ribbing. Do not iron directly over any printed or stamped graphics if present.
Care Routine at a Glance
Follow these steps to keep the Flow Stamp Hoodie looking and fitting its best.
- Turn inside out: Protects the cotton face and any graphics from abrasion during washing.
- Cold water, gentle cycle: Cold water minimizes shrinkage and color bleeding. Gentle cycle reduces mechanical wear on the fleece.
- Mild detergent only: Harsh detergents or bleach can weaken the cotton fibers and dull the color.
- Low heat or air dry: High heat is the most common cause of shrinkage in cotton-blend fleece. Low heat or line drying preserves the fit.
- Remove promptly: Leaving the hoodie in the dryer after the cycle ends can set wrinkles and stress the ribbing.
What the Catalog Does Not Cover
The supplied product record does not include specific washing instructions from the manufacturer, a size chart, or details about the hoodie's thermal performance. The care routine above is based on the confirmed 80/20 cotton-polyester blend and general best practices for fleece garments. If you have specific concerns about shrinkage or print durability, test the care method on a small inconspicuous area first.


