MagnaFlow Exhaust, Mufflers & Cat Converters - Quality

MagnaFlow 2001-2004 Toyota Tacoma 2.7L California Grade CARB Compliant Direct-Fit Catalytic Converter 447218

MagnaFlow 2001-2004 Toyota Tacoma 2.7L California Grade CARB Compliant - Main image
$1070.04 $1446 In stock

Category: 触媒コンバーター

MagnaFlow カリフォルニアグレード CARB 準拠ダイレクトフィット触媒コンバーター 447218 で、チェックエンジンランプをオフに保ちましょう。フリーフロー・マンドレルベントチューブや耐食性に優れたステンレススチール構造などの特長を備え、適切な工具を使えば、切断や溶接を必要とせず、このコンバーターを自分で簡単に取り付けることができます。MagnaFlow の最先端の計測部門は、研究開発中に最新の 3D スキャンシステムを使用しているため、新しい部品が純正品と同様にフィットし、機能することを確信できます。OE 設計を再現することで、単一のレーザー溶接により漏れの可能性が大幅に減少し、コンパクトで低質量の設計により、熱効率も向上します。このダイレクトフィット触媒コンバーターは、2001~2004 年式のトヨタ タコマ 2.7L に適合するように設計されています。MagnaFlow 447218 には (2) フラットリングガスケットが含まれており、純正部品 17403-0C010、17403-0C011 と互換性があります。この交換部品は、カリフォルニア大気資源委員会の要件を満たすかそれを超えるように設計されており、記載されている車両について、カリフォルニア州および CARB 規制対象州での合法的な使用を可能にするために、CARB ガイドラインに準拠する追加テストを受けています。

お支払い前の確認

利用可能な支払方法と最終金額は購入手続きで表示されます。

発送までの時間

注文の処理時間と配送時間の両方を見込んでください。

Standard Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

Express Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

規定を見る
返金が必要なとき

返金については注文番号を添えて店舗にお問い合わせください。

返送前に返金処理期間をご確認ください。

規定を見る
配送料金

お届け先と選択した配送方法の料金をご確認ください。

Standard Shipping · アメリカ合衆国: $0.00

Express Shipping · アメリカ合衆国: $3.99

規定を見る
返品前の確認

返送する前に適用される返品条件をご確認ください。

アメリカ合衆国 · 返品期限(受取後の日数): 30. 返品方法: 郵送. 返品送料: 販売者負担.

規定を見る

Customer Reviews (5.0 / 5 · 5 reviews)

Sofia ★★★★★

The mandrel-bent tubing made installation a breeze on my 2004 Tacoma, and the CARB compliance gives me peace of mind. It fits perfectly and the check engine light stayed off after swapping out the old one. Couldn't be happier with how straightforward the whole process was.

William ★★★★★

I bolted this on my '03 Tacoma and the fit was perfect—no extra shims or cutting required. The mandrel-bent tubing is a nice upgrade over the old crushed pipes, and it's been holding up well to road salt. Check engine light stayed off through two smog checks so far.

Samuel ★★★★★

That CEL light finally went away after I bolted this in over the weekend. The mandrel-bent tubing lined up perfectly with the stock mounts, so the whole job took less than an hour even on jack stands.