Back to Blog
How-to Guides 2026-11-17 MagnaFlow Exhaust, Mufflers & Cat Converters - Quality 0 views

Kia Forte 1.8L Exhaust Replacement: BRExhaust 106-0856 Guide

Kia Forte 1.8L Exhaust Replacement: BRExhaust 106-0856 Guide

Learn how to replace the exhaust on a 2014-2016 Kia Forte 1.8L with the BRExhaust 106-0856 direct-fit kit. Check fit, tools, and bolt-on steps.

Confirm the 106-0856 fits your Forte before you start

The BRExhaust 106-0856 is designed specifically for the 2014-2016 Kia Forte 1.8L. Before you order or begin, verify your model year, engine size, and that your vehicle is a Forte with the 1.8L engine. The kit interchanges with OE part numbers 28650A7400, 28710A7400, and 287511M000, so you can cross-check those against your current exhaust if you have them.

This is a direct-fit replacement, not a universal kit. The multi-piece, bolt-on design means no bending or welding is required for installation, and all necessary gaskets and clamps are included in the box. That said, the catalog does not provide vehicle-specific torque specs or a step-by-step service procedure, so you should consult a repair manual for your Forte for those details.

What the BRExhaust 106-0856 includes

Tools and preparation for a bolt-on exhaust swap

  • Basic hand tools: You'll need sockets and wrenches for the bolts and nuts, plus a way to cut or unbolt the old exhaust if it's rusted. The kit includes new hardware, so you won't reuse the old bolts.
  • Penetrating oil and breaker bar: Soak the old fasteners ahead of time; exhaust components often corrode. A breaker bar helps loosen stubborn bolts.
  • Jack and jack stands or ramps: You'll need to raise the vehicle to access the exhaust. Always use proper safety equipment and follow your owner's manual for lift points.
  • Safety glasses and gloves: Exhaust work involves sharp edges and debris; protect your eyes and hands.

Direct-fit installation steps supported by the catalog

  1. 1. Raise and support the vehicle: Lift the Forte safely using jack stands or ramps. Ensure it's stable before crawling underneath.
  2. 2. Remove the old exhaust: Unbolt the old system from the flanges and hangers. The catalog doesn't specify cutting, but if rusted, you may need to cut sections. Support the old exhaust as you remove it.
  3. 3. Test-fit the new BRExhaust 106-0856: Lay out the components and loosely assemble them under the car. The multi-piece design allows adjustment before tightening.
  4. 4. Install gaskets and hardware: Use the supplied 2-bolt gaskets at the flanges and secure with the provided bolts and nuts. Use the U-bolt clamp where indicated. Hand-tighten first.
  5. 5. Align and tighten: Ensure the system clears suspension, brake lines, and fuel lines. Tighten all fasteners once alignment is correct. The catalog does not provide torque values, so consult a service manual for your Forte.
  6. 6. Check for leaks: Start the engine and listen for exhaust leaks at the flanges and clamps. Retighten if necessary after a short drive and cool-down.

Why a direct-fit kit like the 106-0856 simplifies the job

Unlike a universal exhaust that requires cutting, bending, or welding, the 106-0856 is designed to bolt directly to your Forte's factory mounting points. The precision mandrel-bent pipes and included hardware mean you spend less time fabricating and more time getting the job done. This makes it a practical choice for a DIYer who wants a reliable, high-quality alternative to the OEM exhaust without the guesswork.

When to consider a professional install

If your old exhaust is severely rusted or you're uncomfortable working under a raised vehicle, a professional mechanic can install the 106-0856 quickly. The bolt-on design means labor should be straightforward, but always confirm the shop has experience with direct-fit systems. Also note that the catalog does not include step-by-step instructions or torque specs, so having a service manual on hand is wise for any installer.

Related Articles

Customer Service
Home
Products
Cart
Profile