What This Cat-Back Installation Involves
The MagnaFlow Sport Series Cat-Back Performance Exhaust System (model 15519) is designed specifically for the 2009-2016 Audi A4 Quattro with the 2.0L engine. It replaces all stock exhaust components from the catalytic converter rearward, including the mufflers and tailpipes. Because this is a cat-back system, you keep the existing catalytic converter—no cutting or welding is needed at that joint.
This guide covers what the kit includes, fitment expectations, and what to check before you start. It does not replace the full manufacturer installation manual.
Kit Specifications and Design
- MagnaFlow 2009-2016 Audi A4 Quattro 2.0L Sport Series Cat-Back Performance Exhaust System 15519: The system uses 3in. diameter mandrel-bent main piping, two Straight-Through mufflers, and a Dual Straight Driver Side Rear exit with 3.5in. polished welded-on double wall angle cut folded edge tips. The 3in. piping promotes fast exhaust flow, while the dual exit and tip design contribute to the aggressive exterior sound character. Knowing the exit configuration helps confirm it will align with your vehicle's rear cutout.

MagnaFlow 2009-2016 Audi A4 Quattro 2.0L Sport Series Cat-Back Performance Exhaust System 15519
Fitment Expectations from the Catalog
MagnaFlow uses extensive 3D scanning and CNC precision robotic manufacturing to ensure the system fits with a straightforward DIY installation process. The system is designed for the 2009-2016 Audi A4 Quattro 2.0L only—it is not a universal fit part. Verify your vehicle's year, model, and engine size before ordering.
The catalog does not specify included hardware (gaskets, bolts, or hangers). You may need to reuse or purchase separate mounting hardware. Check the box contents upon delivery and compare with any provided instructions.
Sound Level and Legal Compliance
The system is tuned for an aggressive exterior sound with moderate interior levels. The catalog states the sound is 'dyno-proven' and 'refuses to be ignored.' Because noise ordinances vary by location, check local regulations before installation. The moderate interior sound means cabin noise should remain manageable for daily driving.
Installation Checkpoints
1. Safely lift and support the vehicle. The cat-back system replaces parts from the catalytic converter rearward, so you need access underneath the car.
2. Remove the stock exhaust components. Expect rusted or seized bolts—penetrating oil and a breaker bar may be needed.
3. Compare the new system's routing to the original before final tightening. The driver-side rear exit should align with the stock hangers and cutout.
4. Tighten all connections gradually and check for clearance around suspension, driveshaft, and heat-sensitive components. The catalog does not specify torque values; use standard exhaust clamp practice.
5. Start the engine and inspect for leaks at each joint. Let the system heat-cycle once, then re-torque if necessary.
Material and Warranty Notes
The system is built from corrosion-resistant stainless steel and is backed by MagnaFlow's limited lifetime warranty. This covers manufacturing defects under normal use. The warranty does not cover damage from improper installation, accidents, or misuse. Retain your purchase receipt and any included warranty card.


